Multi-purpose adhesive and water porosity resistance BioBond adhesive based on PVA used for wide range or applications suitable for adhesion new concrete, new with Old concrete, plastering and as water porosity Resistance when mixed with cement.
Usage :
As a concrete surface
hardener Clean the concrete surface.
Apply one coat of BioBond diuluted 1:4 with water over a clean surface And allow to dry.
Apply one or two coats of BioBond diluted 1:2 with Water and allow to complete dry before use.
As a mortar for repairing and fooring Add BioBond diluted 1:4-1:6 with mixed mortar (cement and sand ) To form a stiff but workable past
Mortar should be applied over a wet coat of BloBond (3) As a slurry Diluted BioBond 1:3 with water and mix with cement ( or cement and sand) Stirto form slurry to the required consistency. Spread the bond coat over the area to be bonded .
Place the plastering while the bonding application is still went.
